Tutorials By Samantha

NO LONGER ACTIVE

2011-06-07T13:56:00.002-05:00

This blog is no longer active. I No longer write tutorials under Tutorials By Samantha.
You can find my new blog @ Guilty Pleasures Tags N Tuts ! Please go their for all tutorials and
new ones. If you have questions please feel free to email me thanks :)

Samantha

TUTORIAL SITE MOVED

2011-04-16T14:26:00.001-05:00

I have moved my tutorials to
http://guiltypleasurestagsntuts.blogspot.com/

Please follow that site
thanks

Message to all my Followers

2010-10-27T08:18:00.000-05:00

Please make sure you follow my new Tutorial Blog

Guilty Pleasures Tuts n Tags .

I am moving everything over as well a creating a site for my tutorials.

The site can be found here.

It is on my domain. I dont have to worry about fees or anything else..

Please make sure you follow the new blog..

thanks

Samantha

Come Join The Party

2010-10-09T17:48:00.001-05:00

Wanna join a fun group?! Want to Learn PSP if your just starting out, advanced or intermediate...there is something for everyone! So come on over and check it out!!

The group is slowly getting going, but we are looking for anyone who wants to kick back, relax and have some fun! If you join when it asks for a referral name please put drillsergeantswife
in there!!!

Lots of Great Games, Challenges and More.. Great Staff and Very friendly..

http://www.psp-party.com/

UPDATE

2010-10-07T07:51:00.002-05:00

Tutorials by Samantha is not longer what I will be using for Tutting.
I wanted a change so I came up with a enw name..
PLEASE FOLLOW MY NEW BLOG @ Guilty Pleasures Tuts N Tags

I AM MOVING ALL THE TUTS OVER AS WELL
AS GETTING MY BLINKIE TO THOSE I CT FOR THANKS

ALSO I AM LEAVING THIS BLOG UP
FOR THOSE TUTS LINKED TO IT..
BUT THEY ARE ALSO FOUND ON THE NEW BLOG

Samantha

Tanted Love

2010-09-20T08:18:00.000-05:00

This tutorial was written on September 20, 2010 by Samantha

This is using my own creativity and imagination any resemblances is completely

coincidental

Scrap Kit Tanted Love By Kris
You can purchase @ Your Scrap Addiction

Tube by Ismael Rac

Create new Raster Layer
600x600

Open Roundframe 1
copy and paste as new layer
resize your frame down by 75%

Open your tube
copy and paste as new layer
drab below your frame layer

highlighting your frame layer
grab your magic wand and click inside the frame
go to selections, Modify and expand by 3.
Highlight your tube layer
Go to selections invert and hit delete..

Open paper of choice.
I am using Paper 11

Copy and paste as new layer
Move below all other layers

highlighting your frame layer
grab your magic wand and click inside the frame
go to selections, Modify and expand by 5.
Highlight your Paper layer Go to selections invert and hit delete..

Duplicate your frame
Open your tube again Copy and paste as new layer
Move below duplicate frame layer

With your tube layer highlighted
Grab your eraser and erase the part of the tube that
is below the frame

Highlight your duplicate frame layer
Erase the part of the frame that is covering the top of the tube

Open your Lightfantasy
copy and paste as new layer
Move below all other layers

Open the rose
Copy and paste as new layer
Resize by 60
Moving to the top

See mine for placement

Add your name
copyright and save

IT IS A SIMPLE BUT ELEGANT TAG

Quick Page

2010-09-09T12:22:00.001-05:00

Dreamland Designs had a quick page

I absolutely loved. So I grabbed it and here is what i did.

My Lil Paradise

2010-07-02T06:06:00.000-05:00

This is a fabulous kit by 2 very talented designers

Sky Scraps and Created by Jill

came together to bring us My Lil Paradise

You can purchase this kit @ SATC

Tube of Choice.

I am using a new tube created by Ismael Rac.

You can purchase his tubes and a license to use @

His Store. Please remember to follow all TOU

This tutorial was written on 2 July 2010

by Samantha any similiarities is completely coinicidental.

New raster layer 750x750

open lp-clusterframe 4 by Sky
copy and paste as new layer

resize donw by 90

Open tube
copy and paste as new layer

open LP sand 3 by Sky
copy and paste as new layer
Move below your tube

open your mesh 2 by sky
copy and paste as new layer
resize by 90
duplicate and mirror
move below all other layers

open lp paper 7 by sky
copy and paste as new layer
move below your cluster frame.

Grab your magic wand and click inside
the cluster frame
Go to selections, modify and expand to your liking
Invert
Highlight paper layer and hit delete

open your cocktail by Jill
copy and paste as new layer
Resize by 50 %
Mirror and move below cluster frame

Duplicate the cluster frame and move above the cocktail
Grab your eraser and carefully erase the parts of the
frame that overs your glass.
See mine for reference.

open your flipflops by Jill
copy and paste as new layer
Resize by 50 and move above your cocktail glass

open string 1 by jill
copy ans paste as new layer
Move below all other layers

Add your name
copyright and save
You are done.

Emotional

2010-06-27T22:18:00.000-05:00

Something a bit different..

Than my usual.

Written by Me Samantha on 27June2010

Emotional

scrap kit by Stacie Cakes
an image of your self or daughter
I am using myself..

New raster later 750x750

Open paper 19
copy and paste as new layer
hide that layer

open frame 1
copy and paste as new layer
resize down by 80%

open your poser
copy and paste as new layer
Move to the right hand side of the frame

open your purse element
resize down by 50%
see mine for placement

open element ipod2
copy and paste as new layer
resize to your liking and see mine for placement

open your misc elements
copy and paste as new layer
Move below all other layers

Back to your paper layer
unhide it..

I am leaving it alone

open your stargem element
copy and paste as new layer
Move above all other layers
Duplicate and move both to the bottom left.

open your boot
copy and paste as new layer
resize down by 65%
Move above your purse layer
placing where i did mine

Add your name and what ever else you wish
Dont forget your copyright.
Save and your done

Paparazzi

2010-06-14T13:37:00.002-05:00

This tutorial was written on June 14, 2010 by Samantha
Using my own creativity and imagination and similarities is completely coincidental.

Scrap kit Paparazzi by Angel Designz
Tube by Keith Garvey You can purchase his work @ MPT
No outside masks used.

Create new Raster Layer 650x650

open frame 8
copy and paste as new layer
resize down by 80%

open city scape 2
copy and paste as new layer
Move below all other layers

grab your magic wand
highlight the frame layer
click inside the frame

Once you have your marching ants
Go to selections modify
And expand by 3

highlight your cityscape
go to selections
And invert and hit Delete

Open paper14
copy and paste as new layer
Move below your cityscape

grab your magic wand
highlight the frame layer
click inside the frame

Once you have your marching ants
Go to selections modify
And expand by 10

highlight your paper layer
go to selections
And invert and hit Delete

Open glittersplat 3
copy and paste as new layer
Move into position and move
your paper layer
Duplicate and move into differet positions.

Open your tube
copy and paste as new layer
Move above all other layers
Placing in the center

open your phone
copy and paste as new layer
resize to your liking and free rotate to the left
by 21

open clutchpurse2 copy and paste as new layer
resize to your like and move above your cellphone
Below your tube

Open your Camera1
copy and paste as new layer
resize to your liking
Mirror and move below your tube layer

open your sparkles
copy and paste as new layer
resize to your liking
move below your tube layer

open your word art 5
copy and paste as new layer
see mine for placement

Add your name, copyright and save. Your complete.
I would love to see your results just send them to me at
babygirl_0242002@yahoo.com. PLEASE PLACE
DND-TUTORIAL RESULTS in the subject so i do not delete it.

XOXO,
Samantha

Rock and Roll

2010-06-05T12:32:00.000-05:00

You can find this tutorial

Here

Update

2010-05-28T17:45:00.000-05:00

I am behind on a few tutorials. I am still in the process of moving

things over to my Tutorial Site. As you noticed the Blog is still open and the

the tutorial images posted here with a link to the tutorial. So please remember

that when you see the "tutorial can be found Here" or a block that
says tutorial. Click on that and it will take you to the tutorial

My tutorial site can be found @

Tutorialz by Samantha

So please remember to book mark that page as well..

You are more than welcome to grab a tutorial blinkie and

link it to that site.. Below is a blinkie that I have changed the

link of for you

Just grab the code and add it to your blog..

As always I am catching up on writing tutorials and getting them posted

as quickly as I can. May has been a very bad month for me.

Please if you have questions or comments please feel free to leave a comment.

Kiss Me Fool

2010-05-28T17:18:00.000-05:00

Tutorial Site

2010-05-18T08:42:00.000-05:00

I am in the process of moving my Tutorials to a Site

I will still keep this blog open, but all the tutorials will

be found @ Tutorialz By Samantha.

It is a work in progress and I am hoping to have them all

added soon but I am not sure when it will be complete yet.

The only tutorials you will not find their

is the exclusive tutorials for Creative Addictions.

If you have questions please do not hesitate to contact me.

thank you

Chained to Pain

2010-05-18T07:52:00.000-05:00

You can find this tutorial

Here

All My Love

2010-05-12T13:10:00.000-05:00

CREATIVE ADDICTIONS EXCLUSIVE TUTORIAL

You can find this tutorial Here

Remember you dont have to be a member to view

the tutorials on Creative Addictions..

Garv Girl

2010-05-10T14:38:00.000-05:00

Creative Addictions Exclusive Tutorial

Tutorial can be found Here

Glamourous

2010-05-07T11:08:00.000-05:00

Supplies Needed

ScrapKit Glamour Girl by Grunge & Glitter

You can purchase her kit here

Tubes by Keith Garvery

you can purchase his work here

This tutorial was written on 7May2010 by Samantha.

Any similarities is completely coincidental.

Create new layer 700x700

open frame 1 copy and paste as new layer
Resize down by 80%

open both of your tubes.. I am using 2
that have close up layers

Grab one close up layer
copy and paste as new layer
move below your frame layer

Grab your magic wand
and select in the one side of the frame
invert and hit delete.

Do the same with the second tube

Open paper 14 copy and paste as new layer
move below the tube layers

Highlight the frame layer
grab your selection tool
click inside both sides of the frame
Go to selections, modify and expand by 5
Highlight the paper layer and go to selections
invert and hit delete

Highlight tube layer 1
and make it Luminace legacy.
do the same for the other

open doodle 3
copy and paste as new layer
resize by 75%
Move below all other layers
duplicate and flip

open element cluster
copy and paste as new layer
Resize by 80
move above all other layers
place in the center of the frame

open your full size tube
copy and paste as new layer

I used both..
Place on each side of the frame

Add name and copyright dont forger to save.
Your done. I would love to see results.

Please feel free to send them my way.

Regrets

2010-05-06T13:34:00.000-05:00

TUTORIAL CAN BE FOUND

HERE

Unlikely Ballad

2010-04-28T11:05:00.000-05:00

Scrap kit By Polkadot Scraps. Unlikely Ballad is a PTU kit

You can purchase this kit here

Tube is the art work of Ismael Rac. You can purchase his work

and a license to use at Artistic Minds Inc

Mask128 by Weescotslass Creations

This tutorial was written on 27 April 2010 by Samantha

Any similarities to this is completely coincidental

Create New raster layer 700x700

You can resize it later if you would like.

open frame 2 copy and paste as new layer

Open your tube copy and paste as new layer

Duplicate your frame and move one above the tube layer

Grab your eraser and carefully erase the bottom that is sticking out

from the frame . Once you have that done, hightlight the duplicate frame

layer and erase the part of the frame that covers the hair.

Open paper 1 copy and paste as new layer

move below all other layer

go to Layer load/save mask and open your mask of choice

Merge Mask group

Open element 16 copy and paste as new layer

Free rotate to the left by 10

Move to the left of the frame

Open element 14 copy and paste as new later

Move to the bottom left ( see mine for exact placement)

Open frame 6 copy and paste as new layer

move above your mask group

Grab your eraser and carefully erase the parts that is

on the inside of frame 2

Open elements 35 and 36

copy and paste both as new layer

Resize element 35 down by 30 % and move to the

bottom right of your frame

Resize element 36 down by 30% and move to

the right of element 35 Duplicate element36 and

place on the other side of element 35

( see mine for exact placement )

Add your name, Copyright and save your done.

His Lullaby

2010-04-19T09:37:00.000-05:00

his Beautiful Kit is by Polkadot Scraps.
It is a PTU Kit. You can purchase this @ Twilight Scraps

Tube is a Zindy Free Tube. You can get Here

This tutorial was written on 4.19.2010 by Samantha by my own thought

Any similarities is completely coincidental

Create new raster layer 700x700
Open frame 7
copy and paste as new layer

Open your image
copy and paste as new layer
Move below your frame
Megre Down
resize down by 80%

Open element 5
copy and paste as new layer
Move below all other layers
add a drop shadow of choice

open paper 6
copy and paste as new layer
move below all others

Go layers load/save mask.
I am using Mask147 by Weescotslass creations

open element3
copy and paste as new layer
resize by 70%
then again by 60%
Move to the bottom left

open element 1
copy and paste as new layer
resize by 50%
Move infront of your paprer layer
to the bottom left

open element 55
copy and paste as new layer
move below the piano and music later
move to the left (see mine for placement)

open element 51
copy and paste as new layer
Move to the bottom

Add your name and copyright Save and your Done
A simple but Elegant tag

Elegant Romance

2010-04-17T13:18:00.000-05:00

This Tutorial is featuring the

Elegant Romance Kit by Jenny Designz.

It is a FTU Kit. No outside tubes or Masks Used.

This tutorial was written on 4/17/2010 by Samantha.

Any Similarities to this is complete coincidental.

Create new Raster layer 650x 650

open your fram cluster
copy and paste as new layer
reszie down by 20%

open paper 4
copy and paste as new layer
Move below the frames

Grab your magic wand and
click inside of the frames
ONE BY ONE
Go to selections, modify and expand by 7
Go to selections invert
Highlight your paper layer and hit delete

grab your dark swan
Copy and paste as new layer
Place different areas in easch part of your
frames

Add a luminance legacy to those.

open doddle 2
copy and paste as new layer
moving below your paper layer
in the center

open stardust
copy and paste as new layer
move to the top right below your paper
Duplicate and mirror

open poser2
copy and paste to ur liking
Placing in the center

open the flowers with the bow
copy and paste as new layer
resize to ur liking
Free rorate left by 90
Move to the left

Add your name and copyright ur done.

Last Birthday

2010-04-14T15:30:00.000-05:00

Scrap Kit by Brandi @ Grunge N Glitter

Her Kit Last Birthday is a PTU kit. Its on Sale for 1.99 @

Her Store.

Tube of choice. I am using the Work of Elias Chatzoudis

You can purchase his beautiful work and a license to use @

MPT

Font is TheNautiGirl

This tutorial was written by Me on 14 April 2010

any copies is completely coincidental. From my own hyper imagination

Create new raster layer 750x750
We can resize it later

Open Ribbon frame
copy and paste as new layer
resize down by 60

open close up layer of tube
copy and paste as new layer
move below frame

Grab your eraser and carefully erase
what is sticking out from the frame

open paper5 copy and paste as new layer
move below all other

Go to layer
load/save mask from disk
I am using Mask 219 From Weescotslass Creations

Merge mask group.
Resize mask layer down by 80

highlighting your tube layer
add a luminance Legacy to that

open your hearts and glitter
copy and paste as new layer
Move Below your Mask layer

Duplicate Frame Layer and hide the
duplicated layer
Merge the ribbon frame and
close up tube and
Mirror

Open your tube again copy and paste
as new layer
unhide ribbon and move below the tube
duplicate ribbon frame again and move above
the tube layer

Place to the right
Like mine
Grab your eraser
highlight your tube layer and
erase the parts of the tube below the frame

Now hightlight your other ribbon and
erase the parts that are coving the tube

open your cake
copy and paste as new layer
resize by 40%
Move to the blottom left

open gift 1
copy and paste as new layer
resize down by 30%
Move to the right of the cake

Open gift2
copy and paste as new layer
resize down by 30
move beside the other one..

Open all 3 balloons
copy and paste as new layer
Resize the first by 50
Second by 40 and the 3rd by 30

Place behind the cake layer
See mine for exact placement

open your tag 1
copy and paste as new layer
resize down to your liking
Place infront of your cake and presents

Add your name and copyright
Save and your complete

Vindictive Pleasure

2010-04-08T14:11:00.000-05:00

So this one I was playing around with and It come out..

I love how it turned out.. Unfortunately I have no tut for it yet.

But hopefully soon..

Scrap kit is PTU from Gothic Inspirations

You can purchase it in her Store

Vindictive 1

2010-04-08T13:02:00.000-05:00

This is Tutorial 1 with a New PTU kit by Gothic Inspirartions

You can purchase this beautiful kit at her New Store

Tube is the beautiful art work of Elias Chatzoudis.

You can purchase his work here

This tut was written on April 8, 2010

by Samantha any similarities is completely coincidental

Create NEw raster layer 600x600

Open frame 2
copy and paste as new layer

open your tube
grab the close up layer copy and paste
Move below your frame layer

Grab your eraser and carefully erase
the part of the tube that is below the frame

Open paper 13
copy and paste as new layer
move below your tube layer
Go to layers Load mask from disk
Choose your mask and merge group.
I am using Vix_mask148 you can download from http://www.freewebs.com/vixpsp/masks.htm

Open your parchment
copy and paste as new layer
Move above the mask layer
Grab your eraser and carefully erase the
part that is on the outside of the frame

Open your leaves
Copy and paste as new layer
Free rotate right by 40%
Plce below your tube layer
Grab your eraser and erase the part of the
leave that is inside the frame
See mine for ideas.
Mirror and dupliate the leaves and erase those as well

Open your lamp post copy and paste as new layer
resize down by 70% and move to the right
above all layers

Open your potion bottle
copy and paste as new layer
resize to your liking and place to the right
at the base of your lamppost.

open your heart
copy and paste as new layer
Resize to your liking and move below the lamppost

add your name and copyright and save

Miss Understood

2010-04-01T14:14:00.000-05:00

SUPPLIES NEED

MISS UNDERSTOOD PTU KIT BY Grunge & Glitter

Tube by Keith Garvey

Mask 221 by Weescotslass Creations

This tutorial was written on April 1, 2010 by Samantha

All similarities to this is complete coincidental.

Create new raster layer 700x700
We can resize it later if you choose.

Open frame 5 copy and paste as new layer
Place in the center of your layer

Open your tube
copy and paste close up layer
Move below your frame layer
grab your eraser and hightlight the tube layer
carefully erase the parts of the tube that
are sticking out of the frame.

Open paper 17
copy and paste as new layer
move below your tube layer

go to Layers
Load/save mask
open mask of choice
once you get that done
Merge mask group

Now hightlight your tube layer
add a luminace legacy to it.

open your barbed wire
copy and paste as new layer
Free rotate left by 90
Move above all other layers
Resize by 65%
Place on the left side of your frame
Dupplicate and mirror
adjust if you need to

open heart 5
copy and paste as new layer
free rotate left by 22%
Resize by 40%
Move to the bottom left of the frame

open the key
copy and paste as new layer
resize by 405
Free rotate left by 22
move below your heart layer

open skull1
copy and paste as new layer
resize by 40%
Add a gradient glow and resize again by 70%
Move to the bottom right

Open your tube again.
Grab your full body tube
copy and paste as new layer
Mirror and place to the right..

Grab your text tool.
TYPE out MISS UNDERSTOOD
In a font of Choice convert to raster layer
Add a gradient glow.
Duplicate Move below your orgional text layer
Add a constellation to it.
Setting of choice

Add your copyright and name
Save and done

Easter Celebration

2010-03-29T12:54:00.000-05:00

TUTORIAL FOUND HERE

Thorns

2010-03-26T20:32:00.000-05:00

Immortal Dreams has awesome scrap kits.

She is an awesome designer and I love her kits.

I had the pleasure to work with her Wicked Thorns Kit

Its a beautiful PTU kit.. You can purchase @ Scraps With Attitude

Poser used is by Lisa aka aka Sophisticated Sraps

This tutorial was written on 3/26/2010 by Samantha aka Sweet Indulgence

This is using my own creativity, any similarities is coincidental.

Create new raster layer 700x700
we will resize it layer

open frame 2 copy ans paste as new layer
resize down by 70%

open paper 6
copy and paste as new layer
move below your frame layer
grab yuor eraser and carefully
erase the part that is on the
outside of the frame..

open one of the posers and
copy ans paste as new layer
move above all other layers
Resize down by 50% and then
by 70%

open the crow
copy and paste as new layer
resize down by 20% and place
on the top of the frame

Open the blood
copy and paste as new layer
Move below all other layers
duplicate and mirror
place on the sides of the frame like mine

Hide the poser layer for
right now

Open the book
copy and paste as new layer
resize down by 15%
move to the left of the frame
free rotate left by 14 %

oen skull 2
copy and paste as new layer
resize down by 15%
Move above your book

Unhide your poser layer
Move down just abit

Open Blackrose 2
copy and paste as new layer
resize by 20%
Move below the book to the left

Open cross2
copy and paste as new layer
resize to your liking and
Move below the rose layer
See mine for placement

Add your name copyright and your done

resize to your liking and don't forget to save

I love Twilight

2010-03-24T08:41:00.000-05:00

Scrap kit By Grunge &Glitter

You can purchase this kit @ GrungeandGlitter Store.

Tube is a Free to Use tube By Zindy S.D. Nielsen

Create new raster layer 600x600

Open frame2 Copy and paste as new layer
resize by 80%

open tube
hide the copyright layer
Make sure your Tube layer is highlighted
Copy and paste as new layer
Place the faces center of the frame

highlighting your frame layer
Grab your magic wand and select inside the frame
Go to Selections Modify and expand by 8

Highlight your tube layer
Go to selection and invert
Hit Delete

Open paper 7
copy and paste as new layer
Move below all other layers

Go to layers load/save mask.
I am using Mask 219 By Weescotslass Creations
Merge mask Group

open your doodle
copy and paste as new layer
Move below your mask layer
Duplicate, mirror and flip

Open your rose
copy and paste as new layer
resize by 50% and move to the bottom left
of your frame

Open your key
copy and paste as new layer
resize by 50 and then again by 60
free rotate to the left by 14%
See mine for placement

Open word art 5
Copy and paste as new layer
resize by 60%
Move to the bottom of your frame

Add your name and copyright.
Save and your done..

Touch of Night

2010-03-22T17:41:00.000-05:00

This tutorial is featuring a brand new

scrap kit by Addicted 2 Scraps. It is PTU Kit

Tube by Ismael Rac. Do not use his work unless

you have a license to do so.

This tutorial was written on 22March2010 by Samantha

Using my imagination. Any similarities is completely coincidental

Create new raster layer 650x650

You can flood fill white but I

am leaving it with a transparent background

Open Element12

copy and paste as new layer

open your tube close up layer

Copy and paste as new layer

Grab your magic wand

Highlight the Element 12 layer

And select inside of it

Go to Selection, modify and expland by 5

highlight your close up layer

Go to selections invert and hit delete

Add a Lumance Legacy to that

Open Element1 copy and paste as new layer

Move behind all other layer

Now open element49

copy and paste as new layer

Resize by 50% and then again by 80%

move to the left hand side of element12

See mine for exact placement

Open element45

copy and paste as new layer

Move to the bottom and duplicate

move the duplicate layer toward the top

Highlight element 12 layer

grab your magic wand and select

go to Selections modify and expand by 10

Highlight the element 45 layer

and hit delete

Do the same with the duplicate layer

open element 47

copy and paste as new layer

move above the bridge layer

Placing in the center

It will have that old foggy look to it

Open element 34

copy and paste as new layer

Move below all other layer

Resize up to your liking

open Your full body tube

copy and paste as new layer

Placing to the left above all other layers

Add your name Copyright and your done..

do not forget to save..

Easter Morning

2010-03-22T13:38:00.000-05:00

Scrap Kit by Gina.

It is a FTU kit that you can download from her blog

Tube by Elias Chatzoudis.

Do not use with out a license to do so.

Mask 226 by Weescotslass Creations

This tutorial was written by Samantha on 22March2010

any similarities to this is completely coincidental.

Create new Rater layer 600x600

open frame 1
copy and paste as new layer
resize down by 70%

open your tube close up
copy ans paste as new layer
Move below your frame
Grab your magic wand and select inside the frame
Go to selection, modify and expand by 5

Highlight your tube layer
selections, invert and hit delete

open paper 5
copy and paste as new layer

Go to layers, load and save mask
merge mask group
add a drop shadow to your mask group

open doodle2
copy ans paste as new layer
move below all other layers
duplicate and flip and mirror

open butterfly4
copy and paste as new layer
Mirror and resize down by 60%
See mine for placement

Open your full version of the tube
copy and paste as new layer
see mine for placement

Now go back to the tube that is below
the frame and add a luminace legacy to it

open candybunny1
copy and paste as new layer
resize by 60%
Move below yuor full tube
and place near the bottom of the frame

Open 3 of your eggs
I am using eggs 1,3,and 5
copy and paste all ass new layer
Resize all 3 eggs by 40% and then by 80%
Move below your candy bunny

Add your name and copyright
save and your done

Sweetest Times

2010-03-22T10:58:00.000-05:00

Yes, another tutorial

Using a Fantastic Kit by Artlor Designs

Its a PTU Kit that you can purchase @ Your Scrap Addiction

Tube of is the work of Keith Garvey.

Do not use unless you have a license to do so

Purchase this and his work at MPT

This tutorial was written on 22 March 2010 by Samantha
This is completely my imagination. Any similarities is completely
coincidental..

Create new raster layer
600x600

Open frame 3
copy and paste as new layer
resize by 30 and then again by 50%

open paper 17 copy and paste as new layer
Move below your frame layer
Go to layer load/save mask
I am using Mask226 by Weescotslass Creations,
merge group

Open Your tube of choice.
Copy and paste as new layer
Move below your frame layer
carefully erasing the legs that are below
the frame

Now duplicate your frame
Move above your tube layer
erase the parts of the frame
that is covering her hands and head.

open bear 2
copy and paste as new layer
resize down by 20% and again by 50 %

Place bottom left of the frame

open your diamond bling
copy and paste as new layer
resize down by 20%
move above your mask layer
just below the bottom of your frame layer

open your heart bouquet
Copy ans paste as new layer
resize down by 20% and then again by 60
move to the top right
See mine for placement

open sparkle3 copy and paste as new layer
resize down by 20%
Move below your diamond bling
duplicate and mirror

Merge Sparkle layers
add a slight drop shadow

Add your name and copyright
save and your done..

Award

2010-03-20T05:27:00.000-05:00

I got this award from Jenny

I am giving it to 4 other girls..

Dark Beauty

2010-03-17T09:52:00.001-05:00

This Beautiful tutorial is featuring a

wonderful scrapkit by Jessica @ Gothic Inspirations

It is part of February' s DarkCravings Blog Train. You
can get this kit here

Artwork is By Ismael Rac.

Please do not use if you dont have a license to do so.

You can purchase his work and a license @ AMI .

Font is TheNautiGirl

This tutorial was written on 17March2010 by Samantha

This is completely my imagination.. Any similarities to this is completely Coincidental.

Create new Raster layer 600x600
open frame 3 copy and paste as new layer

open your tube copy and paste as new layer
move below your frame

Grab your magic wand
highlight your frame layer
select inside the frame
Once you see the marching ants
Go to selections, modify and expand by 9

highlight your tube layer
Go to selections, invert and hit delete

open your tagback grid copy and paste as new layer
resize down by 90%
Move below your tube layer

open paper 14 copy and paste as new layer
Move just about your tagback layer
Grab your eraser and carefully erase the paper
On the outside of the frame.

go back to your tube layer and Add Luminace Legacy to it
Mirror your tube

open the cross with ribbon copy and paste as new later
Resize down by 80 %
Move to the top left of your frame

Open your tube once again
Copy and paste as new layer
Make sure it is above all other layers
Mirror and move to the right

open the bloodsplatter
copy and paste as new layer
Move just above your tag back layer
Duplicate 4 times and place in the
4 corners of the frame

Add your name and copyright.
dont forget to save. Your done..

Shamrock Stalker

2010-03-10T19:42:00.000-06:00

Ismael Rac happens to be one of my favorite

Tube artists. So I thought this was fitting.

This Tutorial was re written on March 10, 2010

BY Samantha. Any similarities to this is completely coinicdental.

Lets Begin

Scrap Kit is Stalkers St. Patricks Day

FTU Kit by Black Widows Creationz.

Tube by Ismael Rac. Remember to use his work.

You must first purchase it and a license to use at AMI.

Mask178 by Weescotslass Creations

Create new layer 600x600
Open frame 3
copy and paste as new layer
Make sure it is centered.

Open paper 5
copy and paste as new layer
Move below your frame layer

Open your mask
Go to layers
load mask from disk
merge mask group

open Mushrooms 1
copy and paste as new layer
place above your mask layer

Open tube of choice
copy and paste as new layer
Move above all other layers
move center right

Open potofgold1
copy and paste as new layer
move below your tube layer
Resize by 45%
Move bottom left

Open teddy1
copy and paste as new layer
resize 40%
Move infront of your pot of gold

Open hat 2
copy and paste as new layer
Resize by 60%
Mirror image
Move behind your pot of gold.

Add your name and copyright your done.

::NOTE::

The original tag does not have the white background.
It did it this way so the copyright can be seen

Peas in a Pod

2010-02-26T21:54:00.000-06:00

Another Tut using the 2 Peas in the Pod Kit

Gemini Creationz and Sticky Kisses Designs

and the kit is exclusive to Scrappin' Bratz.

Artwork by Jasmine Beckett-Griffith.

Purchase at CILM .

This tutorial was written on 26 February 2010 by Samantha.

This is from my own creativity any similarities is completely coincidental.

Create new raster layer 600x600

you can flood fill white if you prefer.

Open paper of choice
I am using GCZ_paper9
Copy and paste as new layer

Open SKD-Mat1
Go to layer/ New Layer mask
From Image
Select SKD_Mat1 from the list

Merge mask group
resize that by 85%

Open yout tube
copy and paste as new layer
She should be centered

open SKD_Frame4
copy and paste as new layer
Resize by 50%
Move top left slightly

Open SKD_Wordart
Copy and paste as new layer
resize by 40% Move to the
top of your frame

Open SKD_Leaf2
Copy and paste as new layer
resize by 80 %
Move below your tube layer
and Duplicate

Your tube should look like she
is sitting on the leaves

Open GCZ_flower1
Copy and paste as new layer
resize by 50%
Move below your tube above the leaves
duplicate and Mirror

Open SKD_Heart1
Copy and paste as new layer
resize by 50%
Free Rotate to the right by 25

See mine for placement
Add your name and copyright and save

2 Peas

2010-02-26T17:52:00.000-06:00

I have the pleasue of being CT for

Gemini Creationz and Sticky Kisses Designs

and the kit is exclusive to Scrappin' Bratz.

NO OUTSIDE TUBES USED

This tut was written on 26 February 2010 By Samantha

any similarities is completely coincidental.

Create new raster layer 600x600

you can flood fill white if you prefer.

Open SKD Heart2 copy and paste as new layer

resize by 70%

Move to the center

Open SKD_Heart copy and paste as new layer

resize by 70%

move toward the center but slightly lower than

the first one

open your GCZ _ Green splat

copy and paste as new layer

move below both heart layers

Now open your GCZ_pink splay

copy and paste as new layer

Moving above yuor green splat

go to image and fit flip.

adjust to ur liking

open GCZ baby 2

copy and paste as a new layer

resize by 60%

open GCZ grass

copy and paste as new layer

resize by 50%

Move to the bottom of the flower on your baby

Move behind the baby layer

Duplicate the grass and move up slightly

Make it to where it looks like they are sitting

on the grass Duplicate a third time if you need to

Add your name and your done..

I will be back with another featuring this great kit :)

Irish Luck

2010-02-25T14:14:00.000-06:00

A mini Tut featuring a great Irish Luck Kit by Addicted 2 Scraps

It is a FTU Kit. So if you download please Leave Lots of love

Tube used is Ismael Rac. You can purchase his work and a

license to use at AMI .

Mask178 by Weescotslass.

Create New raster layer 600x600

you can flood fill white, but I prefer transparent.

Open paper 4
copy and paste as new layer

Open your mask as a new image
Go to layer, New Mask Layer, From Image
Open your mask of choice.
Merge Mask Group

open your tube
copy and paste as new layer
place in the center of your Merged Mask

open element 10 copy and paste as new layer
Move below your tube layer toward the bottom
Duplicate and mirror

open element 14
copy ans paste as new layer
move below your tube layer as well

Add Text of choice.
Copyright and your name
Save and your complete.

Candy Kisses

2010-02-24T14:14:00.000-06:00

It is a pleasure to be working with Gina from

Ginas Gems Tuts N Stuff. She has great scrapkits.

This Tut is Featuring Her Pink Candy Kisses Scrap Kit.

You can purchase this Kit at Twilight Scraps.

Tube of Choice. I am using the Work of Keith Garvey.

You can purchase his work at MPT.

Mask178 by Weescotslass.

This tutorial was written by Samantha on 24February2010.

Any similarities to this is completely coincidental.

Create New raster layer 650x650
You can flood fill white but I choose to leave it transparent
Name this Background layer

Open Knotted Ribbon Heart Frame 1
Copy and paste as new layer
resize down by 80%

Open tube of choice
Copy ans paste as new layer.

I am using the Closeup layer first
Move below your frame layer

highlight the frame layer and grab your magic wand
Click inside the frame
go to selections, modifty and expand by 5

Highlighting your tube layer
go to selections and invert
Hit Delete

highlighting your background layer
Open a paper of choice, I am using paper 9
copy and paste as new layer

Open your mask as a new image
Go to layer, New Mask Layer, From Image
Open your mask of choice.
Merge Mask Group

Adjust your mask to where the heart is in the center
highlight your tube layer and add a Luminance Legacy to your tube.

Open your tube once again and grab a full size image
Copy and paste as new layer move above your heart frame
Go to image and mirror this layer
Move to the right

Open paper heart 4
copy and paste as new layer
resize down by 50 %
Moving below your frame layer
Add a free rotate to the left by 25

Open peppermint heart 1
Copy and paste as new layer
Resize down by 50%
Move below your frame layer
placing the bottom of the heart over
the bottom of the paper heart

open Teddy Bears 2 copy and paste as new layer
Resize down by 20 %
Move to the bottom of the frame

Open butterfly 6
Copy ans paste as new layer
resize down by 50 %
Move to the top left

Add your copy right and name
Dont forget to save.

Send me your results.

You can email them to

sweetindulgence09@gmail.com

I would love to display them on my blog..

Bella's Heart

2010-02-22T21:06:00.000-06:00

Bella's Heart is using a beautiful Kit

by Dark Pheonix Designs, It is a PTU Scrap Kit.

You can visit her blog here.

Mask 219 is by Weescotslass Creations

Images from Twilight, you can find them on Google.

This tutorial was written on 22 February 2010, but Samantha

Made from my own imagination. Any similarities ic completely coincidental.

Create new raster layer 650x650

Open paper 4 copy and paste as new layer
Resize to your liking
Hide that layer we will get back to that.

Open Element 17 copy and paste as new layer
resize by 70%

take your image copy and paste as new layer
Place below the Element 17
erase what is sticking out of the sides of the frame

Open element 10 copy and paste as new layer
resize by 60%, move to the left
free rotate by 20 % to the left

Open element 12 copy and paste as new layer
resize by 20 % and move to the left
PLace the circle over one of the ones on the frame
Move below element 10

Open element 9
copy and paste as new layer
resize by 40%
Move to the left

place over your heart
And free rotate to the left by 10%
Move below your heart layer.

Unhide you paper layer
go to layer, load/save mask
I am using mask 219 By Weescotlass
merge mask group and resize to your liking

Add your name and copy right.
Your done.

Be Mine

2010-02-12T16:02:00.000-06:00

Scrap Kit and poser by Emma @ Sensual Posers .

Mask of choice. I am using WSL 185 by Weescotslass Creations
Mehdi filter you can download from here.

This tutorial was written on 13 February 2010 by Samantha

Any similarities to this is completely coincidental.

Create new raster layer 600x600

open element 17 copy and paste as new layer
centering
open poser 3
copy and paste as new layer
resize by 50%
make sure that rezie all layers is unchecked.
Mirror and move down just a little

open paper 5
copy and paste as new layer
go to layers load/save mask
load mask from disk
Mege mask group

add a drop shadow to your masklayer

open element 10
copy and paste as new layer
Move to the top right
and resize by 80%

open element 15
copy and paste as new layer
move above your mask layer

Go to Effect and down to where your
plugins are located.
find your Mehdi plugin
Go to Melt

use the following settings
size 5
amount 29
ratio 0

open element 20
copy and paste as new layer
resize by 51%
Move top left

Highlighting your Element 17 layer
open your text tool
I am using MeaCulpa
You can what ever
size of the font is 12
type in be Mine i am making
it a red from the poser
add a gradient glow

add your name and copy right and save
send me your results id love to see them

XOXO

Samantha

Love Bites

2010-02-09T18:30:00.000-06:00

Another new tutorial for today.

This one is using the Chocolate Lover Kit

by Puddicat Creations. You can purchase this

kit @ Lollipop N Gumdrops.

Tube by Ismael Rac. You can purchase

his tubes at Artistic Minds.

Mask219 by Weescotslass Creations

This tutorial was written on 9February 2010 by Samantha.

This tut was written from my own imagination.

Any similarities to this is completely coincidental.

Create new raster layer 600x600

open PDC frame 1
copy and paste as new layer
resize by 80%

open tube of choice.
Copy and paste as new layer
Duplicate your frame layer
Move the duplicate above your tube layer
Erase the part of the frame at the top covering the
top part of your tube layer

Open 2 papers
I am using papers
Paper 12 and paper 5
Minimize one of the papers
Copy and paste the other as a new layer
Move above your background layer

Highlight your bottom frame layer
Grab your magic wand and select inside the fram
Go to Selection, Modify and expand
by 5

Go back to selections and invert
Highlight the paper layer and hit delete

open doodle 6
copy and paste as new layer
resize by 35%
Move to the bottom right

open chocolate heart 5
copy and paste as new layer
resize by 25 % move to the bottom left
free rotate left by 15%

Open chocolate heart 3
copy and paste as new layer
resize by 20%
Place above the white heart

open lovebug2
copy and paste as new layer
resize by 20%
move above the doodle 6
Duplicate and move to the
center of your bow on the frame
Free rotate left by 15%

Now open paper 5
Copy and paste as new layer
move above your background layer

open your mask
Go to layers
new mask layer
from image
merge mask group

open stars 2
copy and paste as new layer
Move above your mask layer

Add your name and copyright and save.
You are done.

I would love to see your results
Please send them too
sweetindulgence09@gmail.com

XOXO,

Bee My Valentine

2010-02-09T13:52:00.000-06:00

Scrap kit Sweetheart (FTU) By Jenny's Designz

Template 141 by Kristin @ Toxic Desirez

Tube by Ismael Rac - Purchased @ Artistic Minds

Mask 218 by Weescotslasscreations

Open template hit Shift D.

This will duplicate your template

Close your origional file
Delete your copyright layer
Canvas size to 750x650
Hide your white bakc ground layer

Open paper 4 copy and paste as new layer
Move above your pink rectangle layer
and hide the paper layer

With your rectangle layer highlighted
Grab your magic wand and select inside the rectangle

unhide your paper layer and highlight it
To to Selections and Invert
hit delete ( this should delete the excess paper )

Open your tube
copy and paste as new layer
carefully erase the bottom part
of your tube that is below your circle layer

Open Frame 3
copy and paste as new layer
resize by 73% and then again by 95 %
Move below your tube layer
Like i did

highlight your white background layer
open paper 5
copy and paste as new layer

Open Mask of Choice
Go to layer- New Mask Layer
Load from Image
Merge Mask group

open your seedbeads
copy and paste as new layer
Move above your mask layer
Resize by 95 %

Add your copyright and name
Save and your complete

I would love to see your results
Please send them too
sweetindulgence09@gmail.com

xoxo,

Samantha

Sweetest Valentine

2010-02-06T12:46:00.000-06:00

Finally another tut for valentines day.

Scrap Kit by Vicki @ Pink Princess Scraps
Tube of Choice, I am using the art work of Ismael Rac - Do not use without a proper license to do so

you can purchase his work and proper use to use @ Artistic Minds
mask of choice - i am Vix_Mask363 by Vix. You can download here

This tutorial was written on February 6, 2010 by Samantha

Any similarities to this is completely coincidental

Create new Raster layer 600x600 - rename background layer
open ele32 copy and paste as new layer
open your tube copy and paste as new layer
Move below your ele32
Erase the botom part of the tube carefully.

Highlight your background layer
and open a paper of choice
I am using pp2
copy and paste as new layer

go to layer and load and save mask
merge mask group
Add a drop shadow to your mask

open ele15
copy and paste as new layer
resize by 40%
move to the bottom right

open ele9
copy and paste as new layer
resize by 70%
move behind your bear.

open ele34
copy and paste as new layer
resize by 70%
Move below your heart

add your copyright
name and your done.
Dont forget to save.

Be Mine

2010-01-26T16:48:00.000-06:00

A simple but sweet tut

Scrap kit Devilish Love by Jules.

You can purchase this wonderful kit Here

Tube is By Ismael Rac. Do not use unless you have a proper liscence to do so

You can purchase his work @ Artistic Minds -AMI

Mask by Weescotslass Creations

Create New Raster Layer 700x700

you can resize it later if you want.

Open Element 8 copy and paste as new layer
resize down by 25%

Open your tube
Copy and paste as new layer
place in the center of your canvas

open paper2 copy and paste as new layer
move below your tube and frame layer
resize down by 40%

Open mask of choice
I am using WSL Mask 84
Load from image
Merge mask group

open element 20
copy and paste as new layer
resize down by 20%

Place to the left of your frame
Near the bottom

open element 19
Copy and paste as new layer
resize down by 20%
Move top right
below your tube layer (see mine for placement)

open element 33
copy and paste as new layer
resize down by 30%
Place below your little Devil layer

open your be mine words
copy and paste as new layer
resize down by 20&
Move the the bottom center

add your name and copy right
your done. It is a simple but sweet tag.
You can resize if you wish.

Chocolate Lover

2010-01-24T20:46:00.000-06:00

Finally a new tut.

Using the Chocolate Lovers Dream Scrap by Naughty Angel

You can purchase this wonderful Kit here

No outside tubes used for this Tutorial.

Mask 133 by Weescotslass Creations
Poser Created By Sinful Mindz

This tutorial was written on 24 January 2010 by Samantha

Any similarities to this is completely coincidental.

new raster layer 600x600

Open element 72

copy and paste as new layer

Resize by 80% and again by 80%

place in the center of your layer

open paper 2

copy and paste as new layer

load mask 133

Merge mask group and make sure

it is centered..

open element 71

copy and paste as new layer

Place top left and duplicate

mirror and flip

move both below the tube layer (element 72)

open element 42

copy and paste as new layer

Resize by 85%

Move below your tube layer

placing to the right.

open element 61

copy and paste as new layer

resize by 85%

Place below your tube layer

placing to the left

open element 37

copy and paste as new layer

resize to your liking and

place above your element 42

open element 43

copy and paste as new layer

Resize by 65%

Place below your tube layer to the left

Add your name and copyright. Your done.

Funky Kind of Love

2010-01-14T11:44:00.000-06:00

New Tutorial for the New Year. I am new on Shani's CT Team.

I have loved her scraps for a while now and finally get a chance to CT for her..

This Tutorial was written by Samantha on January 14, 2010

This was done with my own creativity. Any similarities to this is

completely coincidental.

Scrap Kit Funky Kind of Love by Shani @ Wicked Princess scraps

You can get this Kit as a limited time freebie @ Scrappetizing

Mask of choice I am using Babedesigns Mask 18.

You can download @ Babe Designz.

Tube of Choice If you choose. I am not using any outside tubes

Lets Begin

Create New Raster Layer 600x600

you can resize later if needed

open your WP_FKL_Love or tube and copy and paste as new layer.

Place it in the center

open pp2 copy and paste as new layer

move below your tube layer

Go to layers Load /Save Mask

Merge Mask Group

Open your Butterfly wire copy and paste as new layer

Move below your tube layer placing in the center of your mask

Resize your tube layer by 85%

See mine for final placement

open your rose cluster

copy and paste as new layer

Moveing above the bitterfly wire

resizng by 60&

Duplicate flip and mirror

Open Your Glitter Splat

Copy and paste as new layer,

Move above your mask layer

Add your name and Copyright (if you used a tube)

Save and Your Done ..

Send me your results I would love to see them.

2010

2009-12-25T15:43:00.000-06:00

New years template 3 by Tamie @ addictive PLeasure

down load Here
Scrap kit by Simply sensation scraps FTU download here
Tube of choice. i am uising the work of Keith Garvey. you can purschase his tubes and a liscence to use @ MPT

This tutorial was written on December 25 2009 by me

All similiarties are completely coincidental

Open template and delete copyright layer and background layer
Hit Shift D and duplicate the template
close your origional template

open your tube and copy and paste close up layer
place above the center circle
Add an overlay to yuor tube layer and
Erase the part of the tube that is below the circle..

paste your close up layer again
and move aove the bottom rectangle layer
resize your tube layer by 75%
add a luminance and take the opacity to 33%
open your full body tube layer
copy and paste as new layer move to the right side

open your scrap kit
open glasses element.
Copy and paste as mew layer
resize by 40 and then again by 70 %
Move just above your 2010 line on the bottom and
add your black and while film to the glasses layer
open ballon 4 and resize by 57 % and move below your full body tube layer
add your name copy right and your done.

Holiday Wishes

2009-11-15T12:06:00.000-06:00

Scrap Kit by Beas Creations. You can purchase @ Lollipopngumdrops
Tube of Choice I am using the work of Elias Chatzoudis. you can purchase
his work @ MPT
Mask of choice I am using 226 by Weescotslass.

This tutorial was written on 15 November 2009 by Samantha.

Any similarities to this is completely coincidental.

Create new raster layer 600x600

Open tube copy and paste in the center of your layer
open paper of choice I am using p12
Copy and paste as new layer

Go to layers load and save mask
I am using WSL_Mask226
Merge Group

Open tree4
copy and paste as new layer
move below your tube layer
Move to the right of your tube

Open candle01
copy and paste as new layer
resize by 65%
Move below your tube layer to the left

open present5 copy and paste as new layer
resize by 75 %
Move able your tube layer to the right
duplicate and resize again by 80%
Move the the left of the 1st present

open your deco1
copy and paste as new layer
Move above your mask layer
Duplicate and move the duplicate layer
to the side of the 1st one.

open your word art
copy and paste as new layer
resize by 70%
free rotate by 18% to the left

Add your name and copyright
Save and your done..

Autumn Glory

2009-11-10T14:50:00.000-06:00

Scrap Kit Autumn Glory by Missy Lynn.

You can purchase this kit @ Scraps With Attitude.

Tube of choice. I am using a Pinup Toon.

You can purchase @ CILM .

Mask 226 By Weescotslass.

This Tutorial was written on 10 November 2009, by Samantha (Sweet Indulgence)

This is from my imagination, any similarities to this is completely coincidental.

Create new Raster Layer 600x600

Open tube and copy and paste
as new raster layer
place in the center of your layer

open paper of choice
I am using paper 2
copy and paste as new layer

Go to layers
Load/save mask selection
Load mask of choice and merge group.
I am using Mask 226

open your autumn word art 3
copy and paste as new layer
resize by 75%
move below your tube layer and
to the bottom. See mine for placement

open flower 1 copy and paste
as new layer
resize by 30% and place top right
below your tube

open your scarebear 1
copy and paste as new layer
resize by 69%
Move below your autumn word art
and off to the left

open your hearts
copy and paste as new layer
resize by 50 %
Move above your mask layer
Move to the center of your mask layer

Add your copyright and your name
Save and your done.

Naughty or Nice

2009-11-07T16:12:00.000-06:00

Scrap Kit Christmas Cuties by This and That
You can purchase this scrap Kit @ Lollipopsngumdrops
I am using the beautiful work of Ismael Rac. You can
purchase his work and a liscence to use @ Artistic Minds
Mask 223 By weescotslass creations

This tutorial was written by me Samantha ( Sweet Indulgence )

on 7 November 2009.

This tutorial was written in Corel PSPX2.

With a knowledge of Paintshop.

Create a new raster layer 600x600

Open your tube and set aside for right now.

open frame 3 copy n paste as new layer
resize by 50 % place in center
grab your close up if you have one and
copy and paste as new layer
Place below your frame
add a luminance to your close up
Take the opacity down to about 45%

grab you magic wand
click inside your frame layer
Go to selections and invert
Highlight your tube layer and hit delete

open up paper 10
copy and paste as new layer
move below your tube layer
Layers, load and save mask
Merge group

Open up your naughty or nice book
copy and paste as new layer
move above all other layers
resize by 50% then again by 70%

free rotate left by 45 degrees
place at the bottom right of your image

Now open up your tube
Copy and paste as new layer
Move to the right above your book

open up santas sleigh
copy and paste as new layer
resize by 30%
Place bottom left of your frame

open up your stocking Red
copy and paste as new layer
resize by 30%
Move to the top right
below your tube layer

I added a simple Naughty or Nice
With a Gradient glow.
I am using the font CK Kimono for that
as well as the name

Add your name and copyright and your done

Think Pink

2009-11-04T14:51:00.000-06:00

Another BCA tutorial.

Scrapkit used is Think Pink By Naughty's Creations

You can visit her blog here and purchase this kit here.

Tube of choice. I am using the beautiful work of Ismael Rac.

You can purchase his work and a lisence to use at Artistic Minds.

font used is AquilineTwo

Create new Raster layer
650x600

OPen TP_Fr_4 copy and paste
as new layer.resize by 80%

Open your tube. I am using the close up
of this tube right now.
Copy and paste as new layer
resize your close up by 80%
Duplicate your close up
Her face in one side of the frame
top half in the other side of frame

GRab your magic wand, making sure that
your frame layer is highlighted Click
inside the frame and make sure you get
the little areas too. Go to selections
modify and expand by 5
Then go to selections and hit invert
Hightlighting each tube layer
hit delete
add a luminace to both tube layer and
take the opacity to about 50%

Open paper 8 copy and paste as new layer
Move below all your other layer
we just want this under your frame
so erase what is on the out side of
the frame

Open up your tube again
Copy and paste your full length tube
copy and paste as new layer
resize by 80%
Duplicate the frame layer and move above
the tube layer grab your erase and erase parts
of the frame that covers the tube

Grab the BCA tube that is with the tube
and copy and paste as new layer
Move to the top right

open Tp_EL_2 copy and paste as new layer
resize by 90%
place to where the letters are just below the frame

open TP_EL_47 copy and paste as new layer
resize by 40% Duplicate and free rotate your
duplicated layer to the right by 25%
duplicate your rotated layer and mirror
move over to the other roses
Merge all the roses together

Erase just a piece of each stem
Move below your duplicated frame layer
erasing the parts of the frame that covers
the roses. Duplicate and Mirror
and do the same thing to the other side of the Frame

Add your name, copy right and your done.
dont forget to save

Elegance

2009-11-04T08:55:00.000-06:00

New Tut using a beautiful set I got from AMI

Beautiful Element Pack and Tube by Katnkda.

You can purchase her work and a lisence to use

@ Artistic Minds. Do not use without liscence to do so.

Create new Raster layer 800x800

We can resize it later if needed.

open element 13 Copy and paste as
new layer. resize by 30%. Free rotate
left by 90 degrees.

open element 26 Copy and paste as new
layer. Resize by 50% and then again
by 70% Free rotate to the right by 90
Move to the center

Open your until we meet again BG
Grab your magic wand and select
inside element13.
Once you have your marching ants
go to selections and modify.
Expand by 5%.

Create a new raster layer
Highlight the new layer
Go back to the BG image copy and
paste into selection

open up your until we meet again tube
copy and paste as new layer
Move to the left of your elements

open element 9 copy and paste as new
layer. Resize by 20%
Place to the bottom right

Open element 10 copy and paste as new
layer resize bt 20%
Place at the bottom right below
element 9. Duplicate element 10 and place
top of the element 10

open element 28 Copy and paste as new layer
resize by 90% Move below your flower elements
Duplicate and Mirror Move below tube layer
Do the same with Elements 9 and 10
Move them below your tube layer

open element 11
copy and paste as new layer
move below element 28 duplicate and Mirrio
Move below element 28

Grab your eraser tool and erase the parts of the
beads that is above the bottom layer

Add your name and copyright.
and dont forget to save
You are done.

Spooky

2009-11-03T13:34:00.000-06:00

I know its alittle late for halloween.

But I had this one on my computer.

I thought it was posted but for some reason it wasn't

Scrap kit is SpookNights by Country Hallow Creations.

You can purchase it from her store Here.

Tube is by Elias Chatzoudis. You can purchase

his art and a liscence to do so here.

Mask 223 by Weweescotslass Creations.

This tutorial was written on 3 November 2009 by ME, Samantha (Sweet Indulgence)

Any similiaritis to this is completely coincidental. This is from my own imagination.

This tutorial is simple and sweet!

create new raster layer 600x600

open your window frame
copy and paste as new layer
resizing by 50%

Open your haunted house of choice
Copy and paste as new layer
resize by 75 % Move below yuor frame

Highlight your frame layer once again
resize up to your liking

Open up a paper of chocie i am
using paper 6
copy and paste as new layer
Load and save mask. I am using WSL Mask 223
Merge group and move back up to your frame layer
Grab your eraser and erase the inside part of your frame
You will end up with just the out side of the frame

Open up your tube
Copy and paste as new layer
move to the far right of your frame
and Mirror image

open up A pumpkin of choice
I am using Jack3
Copy and paste as new later
resize by 20%
Move below your tube layer
Duplicte, place both at the 2 bottom corners
of your frame layer

open your bear of choice
I am using bear trick or treater 1
Copy and post as new layer
resize by 40 %
Move to the right above the pumpkin

Add your copyright and name and
save. Send me your results I would

Love to see them

Dark Angel

2009-10-29T15:44:00.000-05:00

New FTU TUT using Beth's Dark Angel Kit

I created the posers.

You can downloading the kit at Ginger Snap Scrapz

You can download the posters and see more at

Sweet Indulgence Poserz.

Create new raster layer 650x650
We can resize later if needed

open frame 3 copy and paste
as new layer

Open a poser or tube of choice
I am using 2 posers that I have created
Copy and paste as new layer
place below your frame
Grab your magic wand
click inside the frame
go to selections and invert
highlight your poser layer and hit delete

open paper of choice
I am using paper 15
copy and paste as new layer
move below your poser layer
Grab your magic wand
click inside the frame
go to selections and invert
highlight your paper layer and hit delete

open your butterfly2
copy and paste as new layer
place at the top of the frame
resize to 85%

add your name and copyright
save and your done.
Its a simple and sweet tutorial

Vampyre

2009-10-29T09:14:00.000-05:00

New Tutorial using a fantastic Kit

Scrap Kit is by Dee @ Scraps By DMG

It is a PTU Kit but well worth it.

I have used no out side tubes or filters for this.

This Tutorial was written on 29 October 2009

From my own imagination. Any similarity to this is coincidental.

Create new raster layer 600x600
open frame 3 copy and paste as new layer
grab your magic wand click inside
frame. Once you have your marching ants
Go to selections, Modify and expand by 8

Open paper 16
copy and paste into selection
open your gate copy and paste as new layer
resize by 75 % Place over the frame and image
You should have it to where it looks like the
gate is oping up to show the path

open the skulls
copy and paste as new layer
resize by 30% then by 80%
Place at the bottom of your gate
Duplicate and place again
Both should be at the bottom
of each side of the gate

open vamp1
copy and paste as new layer
resize by 75 %
Place at the bottom

open your candle
copy and paste as new layer
resize by 20%
place infront of the skulls on the right
Duplicate the skulls on the right
Place over your candle
erase the skull parts covering your candle

Open your black cat1
copy and paste as new layer
resize by 75 %
Move below your skulls and candles
and tube later

Add your name and copyright and your complete
I would love to see your results so send them my way

Forever

2009-10-25T12:27:00.000-05:00

Beautiful PTU Scrap Kit by Stina.

You can purchase this beautiful kit @ Scraps With Attitude .

I am not using any outside tubes for this.

This tutorial was written by me on 25 October 2009.

This was written by my own imagination.

Any resemblance to this is complete coincidental.

Do not copy or claim as your own.

Create new raster layer 600x600
open rose arch 1 copy and paste as new layer
resize by 60%

Open checkered board floor 1
copy and paste as new layer
resize by 80% then by 95%
Move to below the arch, see mine for placement

open piano 2
copy and paste as new layer
resize by 40%
place to the right above your arch layer

open your poser of choice
I am using Edward and Bella 1
Erase your watermark and
copy and paste as new layer
resize by 50%
Move below your piano layer
place kind of center left

open candle 1
copy and paste as new layer
resize by 15%
Move to the bottom of the piano

Open pillow with rose
Copy and paste as new layer
resize by 20%
Free rotate left by 25
Move below your posers

open apple of choice
copy and paste as new layer
resize by 15%
Move to the bottom left of your
pillow layer

Add your copyright
name and your complete

Dont forget to send me your results

SweetIndulgence09@gmail.com

Gangsta Love

2009-10-21T10:42:00.000-05:00

Gangsta Love

I dont know but I love this kit

Growing up I always fell for the bad boys in school

scrap Kit Gangsta Love by Naughty Angel.

You can visit here blog here and purchase this kit here
No out side tubes used.

Create new raster layer 650x650

We can resize it later

grab your selection tool and draw a rectangle
open a paper of choice, I am using paper3
Copy and paste as new layer
Invert and highlight your paper and hit delete

Move that to the center

Open blingcorner 1
Copy and paste as new layer
place at the bottom of your paper
Duplicate and mirror
then flip

open the rose
copy and place as new layer
place at the bottom right hand corner

open couple 1 copy and place as new layer
See Mine for placement

open couple 2
copy and paste as new layer
resize up to yuor liking
Move below your bling layers and
erase what is hanging out

take your transparency level down to about 70

open gun3 copy and paste as new layer
resize by 40 %
Free rotate left by 15%

Open gun
copy and paste as new later
resize by 50%
Free rotate right by 15%

Over lap your guns

Open up your word art and grab
the words of choice, I am using the
complete Gangsta Love word art

resize by 85% Move above all other layers
place it top right of your image

Add your name, copyright and your done.
Save and dont forget to send me your results.

Wicked Halloween

2009-10-18T12:45:00.000-05:00

Scrap Kit - A wicked Halloween By Jens Sweet Temptations.

You can purchase this kit and more @ Lollipopsngumdrops

Tube by Elias Chatzoudis . You can purchase his work and a license to use @ MPT

Mask 405 by Vix . If you download remember to leave her lots of Love.

This tutorial was Written by Samantha on 18October2009.

Any similarities to this is completely coincidental.

Create new Raster Layer 650x650

we can resize it later
Flood Fill White if you choose too

Open up your tube of choice and
copy and paste as new layer

Open your CP Panel and Grab a color
Create a new raster layer and flood fill
with color of Choice

I am using #333333

Go to layer Load and Save mask.
You can use any mask you choose.
I am using Mask 405 By VIx.
Merge Mask group

Go back to your tube layer and resize by 90
Mirror and place
Duplicate tube layer,
grab your selection tool and draw a rectangle
Go to Selections invert and highlighting your
duplicated tube layer hit delete
Add a soft Light to that and move below your
mask layer

Open Flower3 copy and paste as new layer
reszie by 50% and duplicate, place along the
bottom of your mask layer

Open your suckers, I am using all 3
Copy and paste the candy 8 as new layer
resize by 20%
Place below your tube layer

Copy and paste the candy 10 as new layer
resize by 20%
Place on top of the other one
free rotate right by 20

Copy and paste the candy 9 as new layer
resize by 20%
Place on top of the other one
free rotate left by 20

Open your cake, copy and paste as new layer
Resize by 40%
Place bottom right of your image

Open candy 1 copy and paste as new layer
resize by 60%
move below your cake layer
Erase what is below the cake
You will have 3 little piece sticking out

Open your bat Copy and paste as new layer
resize by 40% free rotate right by 20
Move below your tube layer

Add your copyright, name and save.
Your done.

Dont forget to share your results.
You can send them to scrapsbysamantha@gmail.com

Kissing A Vampire

2009-10-13T22:36:00.000-05:00

This was just a practice with this Kit but had to tut it anyway.

I love that this one is so simple and sweet.

Scrap Kit - Enddless Dawn by Envied and Admired
Twilight image of Choice. I found this one on Google.
mask399 by Vix

Create new Raster layer 600x600

Open frame5 copy and paste as new layer
resize by 85%

Create a new raster layer
Grab your Selection tool and draw a rectangle
on the inside of your frame
Highlighting your new layer
Copy image and paste into selection

Move the image below your frame layer

Open your chess pieces
copy and paste as new layer
resizing by 80%
Place it on the bottom right

Open your blood splatter
copy and paste as new layer
I split the blood splatter into 2
You can do it how ever.

Open rose of choice
Copy and paste as new layer
resize by 95%
Free rotate Right by 90
Move to the right of your frame
behind your chess pieces

open paper of choice
I am using paper14

Copy and paste as new layer
Move below all other layers
go to layers, load/save mask
(i am using mask 399 by Vixx
Merge mask group

You can add what other elements you want
but i want to keep it simple.
It looks perfect the way it is.

Add your name and Copyright.
Save and you are done..

I would like to see your results please send
to SweetIndulgenc09@gmail.com

Simply Sexy

2009-10-10T12:44:00.000-05:00

Scrap Kit I Love Chrome By Ziggyfan.

It is a free to use kit. You can download here.

If you download be sure to leave her lots of love

Artwork of Ismael Rac, you can purchase his work and a

license to use @ AMI .

Create new Raster layer 600x600
and flood fill white

grab your rectangle tool and create a rectangle
go to selections, modify and add border
Outside border by 10
Flood Fill your border on your frame with color of choice.
I am using black

Grab your tube copy and paste as new layer
Move above your tube layer and erase the
part of her legs that are below the frame

open paper of choice.
I am using paper 2
Copy and paste as new layer
Move below your frame layer

Go to selections expand by 3
making sure your paper layer is highlighted
Selections invert and hit delete

open your star
copy and paste as new layer
resize by 70%
move to the top right of your frame

Open your ipod
copy and paste ipod as new layer
resize by 50%
Move to the bottom left

Copy and paste headphones as new layer
resize by 50%
place near your star top right

open your shorts
copy and paste as new layer
resize by 60%
Place bottom right

Open your shirt
copy and paste as new layer
resize by 60%
move blow your shorts

Add your name, copyright and save.
You are done.

Send your results to Scrapsbysamantha@gmail.com

BCA ( Be Aware)

2009-10-08T17:50:00.000-05:00

Since October is Breast Cancer Awareness Month

I decided to do a tutorial..

Scrap Kit BCA 2009 by Blue Dream Designs

Artwork of Ismael Rac. You can purchase his tubes and a license

to use his work @ Artistic Minds

Mask 363 by Vix

Create new raster layer 600x600
open frame 5 copy and paste as new layer
resize by 80%

Open tube copy and paste as new layer
I am using the close up first
Move below your frame layer
highlighting your tube layer
grab your eraser and erase the part of the
tube that is showing from under the frame

Open a up paper 10
copy and paste as new layer

Go to layers Load and save mask
Merge mask group
add a drop shadow to your mask group

Grab the full size layer
copy and paste as new layer
Mirror the image and place about your frame layer

Erase the parts of the tube that is below the frame
Duplicate frame layer and move about your full size tube layer
Erase the parts of the frame that over your tube

Add elements of choice and words of choice

Add your copyright, name and Save.

I would love to see your try at my tutorial.
Please send to scrapsbysamantha@gmail.com

Angel

2009-10-06T19:22:00.000-05:00

Scrap Kit by Bits N Bobs, you can purchase the scrap kit here
Tube by Ismael Rac Purchase his work and a license to use @ Artistic Minds
Mask 404 By Vixx You can dowload them from here.. Remember if you download anything
from her site leave her lots of love..

This tut is written by Me on 6October 2009. Any similarities to this is completely coinicidental

Open new raster layer

600x600 flood fill white

open frame 3 copy and paste as new layer
resize by 80%
open tube of choice copy and paste as new layer
resize by 80%
Move tube behind your frame layer

Open your paper of choice
i am using paper 1
Copy and paste as new layer
Moving below all other layers

Go to Layers load/save mask image
Open your mask of choice and merge group

Open flower 3
copy and paste as new layer
resize by 75%
Move above all layers
Duplicate 4 time and place along the bottom of your frame

open string 4 copy and paste as new layer
Move between your frame and tube layers

Open doodle 4
copy and paste as new layer
resize by 70 %
Duplicate and mirror
Merge down
Add drop shadow of choice

Add your copyright, name and save

I would love to see your results..

Please send your results to

Scrapsbysamantha@gmail.com

TOU

2009-09-30T22:47:00.000-05:00

Any and all tutorials are written by me and any similiarities is completely coincidental

You may share my tutorials with other groups providing you add my link back to me. My tutorials are for personal use only, NOT FOR PROFIT.
You may print out my tutorials for your OWN personal home use.
You may translate my tutorials but please send me a link to your site that you have translated them on.
DO NOT Hotlink any images off my site.
DO NOT snag any images from my site.
Questions or concerns please feel free to message me

XOXO,
Samantha

Skater Babe

2009-09-30T22:19:00.000-05:00

Scrapkit Garvs Sk8tr by Missy @ Scraps with Attitude

Tube by Keith Garvey purchase his work and license to use @ MPT

Mask 238 by Weescotslass

This tutorial was written by Samantha on 30 September 2009.

Any similarities to this is completely coincidental.

Create new raster layer 600x600

open film strip frame3
copy and paste as new layer

resizing by 60 %
Move to the bottom and duplicare
open tube of choice
copy and paste as new layer
Move duplicated frame above tube layer
and erase the part that covers your tube

open paper 19 copy and paste as new layer
Go to layers, load/save mask
I am using mask 238 by Wees

open up buttom bow 3
copy and paste as new layer
reszing by 50 % then again by 80 %
Move to the bottom of your frame
in the center..

open your skateboard of choice
I am using board1
copy and paste as new layer
resize by 40%
Free rotate right by 49.91%
duplicate and mirror

open butterfly of choice
Copy and paste as new layer
resizing by 20%
Place on your board.
Duplicate and place at the bottom of your frame

Add your name Copyright and your done.
Send your results to scrapsbysamantha@gmail.com

Lilac Kisses PTU

2009-09-29T20:46:00.000-05:00

Scrap kit by JTs Designs Lilac Kisses

Art work of Elias Chatzoudis purchase his work and license to use @ MPT

Mask284 By Weescotslasscreations

Create new raster layer 600x600
Open frame 6 Copy and paste as new layer
resize my 80%

open paper of choice
copy and paste as new layer moving
below your frame layer.

Go to Layers, Load and save mask
I am using WSL238

Merge mask group

Open tube of choice.
Copy and paste as new layer
Move to the right below your frame

Grab your magic wand and click inside
the frame Go to selections modify and
and expand by 3
Invery
and hightlight your tube and hit delete.

add a luminace to your tube

Copy and paste tube once agian and mirror

Copy and paste butterfly of choice
Resize by 61 %

add your copyright, name and you are done.

Please send your results to Samantha

Spookyville Tut

2009-09-26T17:32:00.000-05:00

Kit by Danielle @ Dazzing Scraps
purchase it here

Tube by Ismael Rac

mask by Weescotslass Creations

This tutorial was written by me any similarities to this is completely coincidental.
Lets begin

Create new raster layer 600x600
open paper of choice. i am using paper 11
Copy and paste as new layer

go to layers
Load/Save mask of choice.
I am using WSL-mask 94

open tube of choice
Copy and paste as new layer
Resize tube layer by 80%

Open your spooky word art
Copy and paste as new layer
Move to the bottom of your tube
Duplicate tube and grab your eraser tool
Erase the parts of the legs that
are over the word art

Open up your haunted house
Copy and paste as new layer
Move above your mask layer
You will see the ghosts on the side
of your tube

Open your pumpkin. I am using Pumpkin 1
Copy and paste as new layer
resize by 50%
Place to the bottom right
See mine for placement

Open both brooms
copy and paste broom 1
resize by 60%
Free Rotate right by 15%
Move below your pumpkin

Copy and past broom 2
resize by 60%
Free Rotate left by 15%
move below your pumpkin

Add your copy right name and save
Your done.. Send me your results

Please send your results to Samantha

Hottie in the City

2009-09-24T14:49:00.000-05:00

Scrap by Tiny D you can purchase @ scrappinbytiny
Tube by Keith Garvey you can purchase his work and license to use @ MPT
Mask by Weescotslasscreations

This tutorial was written by me on 24 September 2009

All similarities are completely coincidental.

Create new raster layer 600x600
open your tube Copy and paste as new layer

Open your City block
Copy and paste as new layer
resize it by 50%
Move below your tube layer

hightlight your tube layer
mirror your tube layer

Open a paper of choice.
I am using paper 25
Copy and paste as new layer
Move below your city block

Go to layers load/save mask
Use Make of choice
I am using WSL_Mask84

Merge Mask group

Open your cuffs
resize by 49% move to the bottom of your city block
below your tube

Open your lipstick
copy and paste as new layer
resizing by 50%
Move right above your city block below your cuff layer

open your cellphone of choice.
I am using the pink one

Copy and paste as new layer
resizing by 40%
free rotate by 10.70 to the left

Move to the left of your city block below your
tube layer

You can add what ever elements
or words you want

I have added Hottie in the City
Added a Gradient white glow to that
with an over lay

add your name, copy right and save
your done.

Please send your results to ScrapsbySamantha@gmail.com

I would love to see them..

thank you for trying my tut

Rockin 'Round the Clock

2009-09-22T17:15:00.000-05:00

Scap Kit Rockin Round the Clock @ Envied & Admired Scraps
Mask of choice, I am using mask 97 By Weescotslasscreations

NO OUTSIDE TUBES USED FOR THIS TUT

This Tutorial was written on 22 September 2009 By Samantha.
All similarities to this is completely coincidental.

Create new raster layer 600x600

open frame of choice
I am using frame 2
Copy and paste as new layer
resizing by 80%

Open a girl and boy of choice
Copy and paste the girl
resize to your liking and move below your frame
Do the same to the boy..

Grab your eraser tool and erase the parts of
the tubes that are showing oout of the frame

open papers of choice
I am using paper 7 and paper 2
Load layer mask
I am using WSL Mask 97
Paper 2 resize up by 115 % and move
below the 1st paper

Open your record
copy and paste as new layer
resize by 20%

Open your jukebox
copy and paste as new layer
resizing by 30%
Move to the bottom left
Move your record to the top
behind ur jukebox
Duplicate record and move down slightly

Open Music notes2 Copy and paste as new layer
resize by 30%
duplicate 2 time and move around

open Clock 2 copy and paste as new layer
Resize by 20%
Move to the top of your image

Add your name and copyright
Save and your done.
I wanted to keep it pretty simple..

Witches Brew

2009-09-18T08:12:00.000-05:00

New Halloween tut using a FTU kit.

Just a lil Spook FTU kit by ScrapsbyDMG
Tube of choice. I am using Ismael Rac. You can purchase his work here
Mask of choice. I am using Mask 43 by Weescotslass Creations

this tutorial was written 17 September 2009, by me. Any similarities is completely coincidental.

Create new Raster Layer 600x600
Open frame 3 copy and paste as new layer
resize by 80%
Open tube of choice. I am using the work of
Ismael Rac

Copy and paste tube as a new layer
Move below your frame layer
Grab your magic wand
Click inside the frame, go to selections
Invert and highlight your tube layer and delete.

Open your paper of choice
I am using paper 16
Copy and paste as new layer
move below your tube layer

Go to layers, load/save mask of choice
I am using WSL43
Merge group

Copy and paste your tube once agian
Resize by 90%
mirror and move to the left..

highlight your tube that is in the frame
Add the lighten effect on her and take your
transparency to 94%

open spiderweb 1
copy and paste as new layer
Move above your mask layer

Open spider 2
Copy and paste as new layer
resizing by 30% Move to the top right of your frame
duplicate and Mirror

Open your cauldron
Copy and paste as new layer
resizing by 30%
Move to the bottom right of your frame

open your cat, copy and paste as new layer
resizing by 30%
Move below tube layer 2.
duplicate and mirror.
The second cat should be near your cauldron
Move it below your Cauldron

Add word art of choice
Name and copy right
Save and your complete.

Please send me your results I would love to see them
scrapsbysamantha@gmail.com

I Got an Award

2009-09-10T17:59:00.000-05:00

♥ Thank you Naughty's Creations for my award
make sure to follow the award guidelines:
1.display the award on ur blog
2.Link to the blog u recieved it from
3.Nominate 10 other blogs
4.Leave a message for them on their blog
these r the blog I awarded:

1.Envied & Admired
2.Wacky Scraps
3.Scrappin Krazy Designs
4.Melissaz Creationz
5. Anti-Social Distortions
6. Little Mama Dee's Psp Tuts
7. Kays Tutorials
8.Pink Kitty Scraps
9. Paradise Designs
10.Pimp'd Tutorials

Beach Fun

2009-09-09T08:22:00.001-05:00

Scrap Kit Beach fun by ZiggyFan
Mask 85 by Weescotslass Creations
Tube of Choice I am using Pinup Toon, please do not use unless you have a proper license to do so. you can purchase his work and a license @ CILM

This tutorial was written by me on 9 September 2009. Any similarities to this is completely coincidental.

Open new raster layer 600x600n
Open tube of choice
copy and paste as new layer

open paper of choice I am using paper 6
Copy and paste as new layer
Go to layers, load and save mask
Merge mask group
Move below your tube

Open both of your surf boards.
Grab one copy and paste as new layer
Move below your tube layer
Free rotate right by 15

copy and paste your second surf board
Move below your tube
Free rotate right by 15
mirror image

Open your sand castle
Copy and paste as new layer
resize to your liking and move below your tube layer
bottom left for placement

Open your sand pale
copy and paste as new layer
resize to your liking
Move to the bottom right

Open your umbrella
Mirror image
resize to your liking and move behind your pail

Open your life ring
copy and paste as new layer
Resize by 50%
Free rotate by 50
Move below both surfboards and behind your tube

add your copy right, name and save
you are complete.
Dont forget to send me your results to scrapsbysamantha@gmail.com

Happy Halloween

2009-09-05T09:59:00.000-05:00

Scrap Kit Halloween by Sarah. You can puchase @ Pimp My tags with Scraps
Tube by Keith Karvery, You can purchase his work @ MPT. Do not use unless you have a proper license to do so.
Maske 362 by Vix, you can download here

Lets get started. This tutorial was written by me on 2September 2009. All similarities to this is completely coincidental..

You will need pspx2 or any earlier version

Create new raster layer 600x600 Flood fill white,
Open your frame of choice. I am using Frame2
Copy and paste as new layer
Grab your magic wand and click inside the frame
Make sure you get all the little circles too
Then go to selections, modify and expand by 6

open your tube of choice. Copy and paste as new layer
I am using the close up layer for this tube.
Go to selections, invert and delete

Now go to your regular tube layer
copy and paste as a new layer
Go to image and mirror, move to the left of the frame

Open a paper of choice. I am using pp7
Copy and paste as new layer
Move below your frame layer
Highlighting your frame layer
Grab your magic wand and click inside the frame
Make sure you get all the little circles too
Then go to selections, modify and expand by 6

highlight your paper layer, go to selections
invert and hit delete.

Now open your spilled beads 1 element
copy and paste new layer
Move below your paper layer resizing by 80%

Open your couldron, copy and paste as new layer
Move above your tube layer and resize by 50%
Move to the bottom right of your frame

open up the cat of choice. I am using cat1
Copy and paste as new layer
resize by 50% and move to where it is sitting on the couldron

Open up the pumpkin sticker of choice
I am using sticker3. Copy and paste as new layer
Resizing by 50%, pace near the bottom of your couldron

Open up your candy corn copy and paste as new layer
resizing by 50% Move to the bottom, place under your tube layer
duplicate and free rotate right by 35%
Duplicate again and free rotate left by 50%
Merge down and duplicate move the duplicated layer
over behind your couldron
Duplicate again, move up to the top of the frame
resize by 70%, move below the hat of your tube

open up a button of choice.
I am using button2, copy and paste as new layer
Resize by 50% move to the top of your frame layer
see mine for placement

Add words of choice
I added Happy Halloween
and used a gradient glow with this color f7a009

Add your copyright, name and save
You are complete..

Sugary Sweet

2009-09-04T21:58:00.001-05:00

Scrap kit by Tiny you can purchase it @ Tiny D's Tiny D's Scrappin Designs
Art work of Elias Chatzoudis you can purchase it @ MPT
Mask 364 by VIX

Create new raster layer 600x600

Open your tube copy and paste as new raster layer
Flood Fill White

Go to your magic wand too and go to selections
We are going to create a frame.
Create a new raster layer
You want the shape set to rounded Rectangle
Make a small rounded rectangle
Go to Selections, Modify border and outside by 5
Flood fill the frame border with a color from your tube
Duplicate and move down, Merge both together \

Copy and paste your tubemove below your frame layer
selecting your magic wand again
Click inside both frames and go to selections,
modify and expand by 5 then highlighting your tube layer
Go to selections and invert, hit the delete key

Now open up a paper of choice I am using pp19
Copy and paste as new layer, moving above your
white Background layer
Open mask of choice i am using mask 364 by Vix
Merge mask group

Now open your tube once again
Copy and paste as new layer
Mirror your tube

Here is where we have fun with it

Open your sucker elements
I am using 3, Lolli7,8, and 10
Copy and paste lolli 10 as new layer
resizing by 20% Moving slightly below your tube image
Copy and paste lolli8 as a new layer
resizing by 20%. free rototae right by 20
Copy and paste lolli7 as new layer
resizing by 20% free rotate left by 20

Open 2 candy sticks of choice
Copy and paste as new layer
resizing by 30% free rotate right by 20%
copy and paste as new layer resizing by 30%
free rotate left by 20
moving both to the right below her feet

open up an icecream cone of choice
copy and paste as new layer
resizing to your liking and place in the center
of your suckers below her legs

Open up your sparkles
copy and paste as new layer
resize by 50% and free rotate right by 90

Move below your all other layers right above your frame layer
Duplicate and mirror moving the duplicated layer right above your mask layer
Grab your eraser and erase the part of the duplicated layer of sparkles that covers your 1st tube layer

add words if you choose or leave it alone

Add your copyright, name and save

I would love to see your results :) So send them to
Scrapsbysamantha@gmail.com

Pink Seduction

2009-09-03T09:56:00.000-05:00

Scrap Kit pretty in pink by Ali. You can puchase @ Paradise4Scrappers
Tube by Keith Karvery, You can purchase his work @ MPT. Do not use unless you have a proper license to do so.
Maske 362 by Vix, you can download it here. Please make sure you leave a little love when downloading.

Create new raster layer 600x600 Flood fill white,
Open your frame, i am using frame 1
copy and paste as new layer resizing by 50%

Open your tube, copy and paste as new layer
move below your frame
highlight your frame layer and grab your magic
wand clicking inside your frame
go to selections, modify and expand by 6%

highlight your tube layer
go to selections, invert and hid delete
move to the left and take your settings to luminance

Copy and paste your tube layer again
mirror your tube and move the the right.
Resize your tube by 90% (see mine for placement )
duplicate your frame layer and move above
the complete tube layer

highlight your tube layer, and grab your eraser tool
carefully erase the part of the tube that is below the frame
now hightlight your top frame layer and erase the part
of the frame that is covering your tube

Open the paper of choice I am using paper26
highlight your white back ground layer
copy and paste your paper
Go to layers, New masklayer, from image
find your mask in the box, make sure your
source luminance is checked hit okay..

Merge Mask Group
Now open up the butterfly of choice
I am using butterfly 1 copy and paste as new layer
resizing it by 20% move to the top left of your frame for placement

Open the flowers of your choice
I am using flower 3
copy and paste as new layer
free rotate left by 90% and resize by 30%
Move the the bottom of your frame

Add your copyright, name and save.

I would love to see your results please send them to
scrapsbysamantha@gmail.com

Whispers of the wind

2009-09-02T14:44:00.000-05:00

New tutorial Whispers of the Wind.
I am using the beautiful ScrapKit by Ziggyfan - Something Special
Tube is by Jennifer Janesko Do not use unless you have the proper permissions to do so. You can obtain a licesnce to use her work here CILM

This tutorial was written by me on 2September2009. All similarities to this is completely coincidental.

Lets begin :)

You need pspx2 or any earlier version
Open New Raster Layer 600x600
Flood fill White
Open your frame, copy and paste as new layer
Open your tube and copy and paste as new layer
Move under your frame and resize your tube layer by 89%

Duplicate your frame layer and move above your tube layer
Grab your eraser tool and carefully erase the frame over
the hair and arm. Becareful not to erase to much of the frame

Now open up your paper of choice
I am using paper 3
Copy and paste as new layer moving just above your
white back ground layer

Highlighting your intact frame
Grab your magic wand and click inside the frame
Go to selections, Modify, and expand by 6%
Highlighting your paper. Go to selections, invert and hit delete

Open your bows. I am using the purplish one.
Copy and paste as new layer
Moving above all other layers
Resing by 50% free rotate left by 40%

Open your buttons. cut out one and copy and paste as new
layer. Resizing by 50% and free rotate left by 25%
and Move above your bow and to the center..

Grab a font of choice. I am using
Good vibrations

Type out " WHISPERS OF THE WIND IS EVERY DREAM OF THE SOUL."
add a gradient glow of choice

add your copyright, name and save
your done..

Send your results to scrapsbysamantha@gmail.com

My Heart and Soul

2009-08-31T22:54:00.001-05:00

A beautiful scrapkit was used for this tut
Love Story by Naughty Creations. You can find her here
Tube of choice. I am using the artwork of Irene Shpak.Do not use unless you have a proper license to do so. You can purchase her work here
Mask of choice. I am using a mask by Weescotslass Creations

This tutorial was written on 31August2009 by Samantha. All similarities to this tutorial is completely coincidental.

Create new Raster Layer 600x600
Flood fill white

Copy and paste frame 4 as a new layer
Open tube copy and paste as new layer
Moving below your frame layer
Mirror and resize by 70%
Grab your magic wand, Highlight your frame layer
Clicking inside the frame, selections modify
expand by 10%, highligh your tube layer
Selections, invert and hit delete
change the settings on your tube layer to luminance legacy

Open your paper of choice, I am using pp2
Copy and paste as new layer Moving it below your tube layer
Go to layers load/save mask I am using Mask 238
Merge mask group and resize by 80%, Free rotate left by 90 degrees

Open paper of choice, I am using pp11
Copy and paste as new layer, moving below your tube layer
Grab your and click inside the frame. Make sure you have all
the little areas of the frame selected
Selections, Modify, Feather by 5%
Then Selections, Modify, expand by 10%

Highlight your paper layer,Selections, invert and hit delete.

Now its time for your elements
Open your bowlocknkey copy and paste as new layer
Move above your frame layer resizing by 50%
Move to the top left corner of your frame

Open Flowers3 copy and paste as new layer
resizing by 61% move to the bottom right of your frame
See mine for placement.

Open your candle, copy and paste as new layer
resizing by 40% Move to the bottom left of your frame
Open flower5 copy and paste as new layer
resizing by 20% move above your candle layer
with your eraser tool carefully erase the part
that is below the candle

Open up the word art of choice, I am using wordart 5
copy and paste as new layer moving to the top of your frame
and slightly to the right, resizing by 80% and adding
a drop shadow of choice

Add your copyright, name and save and you are done.
I would love to see what you come up with.
Please send to scrapsbysamantha@blogspot.com

Zirconia

2009-08-31T15:54:00.000-05:00

Scrapkit is Zirconia by Tammykat @ Pimp My Tags W/ Scraps
You can check out Their Blog Here
Artwork is by Elias Chatzoudis. Do not use unless you have a proper license to do so.
You can purchase his tubes here
Mask of choice. i am using Mask 81 by Weescotlass Creations

This tutorial was written by me Samantha using Corel Paintshop Pro X2 on
31 August 2009. All similarities to this is completely coincidental.

Create new raster layer 600x600
Flood fill white

open frame of choice
I am using acrylicframe2
copy and paste as new layer
resize by 80% and center

copy and paste tube of choice as new layer
mirror and resize up by 115%
Move to the right of the frame and below the frame

go to selections, Modify and expand by 10
highlight your tube layer
selections invert and hit delete

Take the settings on your tube to luminance legacy
opacity down to 69%

Now open up the paper of choice
I am using solidblack paper
Copy and paste as new layer, move below your tube layer

highlight your frame layer
grab your magic wand and click inside the frame
Go to selections, modify expand by 10
highlight your paper layer, selections invert and hit delete

Copy and paste your tube layer once again
Moving above your frame layer to the left

Open up another paper
I am using purple solid paper
copy and paste as new layer
Moving above your white background

Open up your mask of choice I am using Mask 88
Go to layers, New Mask layer, from Image
Merge group

Now to your elements
Open up purpleblue flower copy and paste as new layer
Resize by 65%
Duplicate, Mirror and flip
Move below your tube layer

Open up your bluegemstar
copy and paste as new layer
Moving right above your mask group

Add your copyright, name, save and your done
I would love to see your results. You can send them to me at
scrapsbysamantha@gmail.com

Sweet N Sassy

2009-08-30T21:17:00.000-05:00

Scrap Kit is by Ziggy, you can find the kit here
Tubes are the art work of Keith Garvery. Do not use without a proper license. You can purchase his tubes and a license here
Mask 81 is by Weescotslass Creations.

This tut was written on 30 August 2009. This is an original tutorial by Samantha.
All others completely a coincidence.

LETS BEGIN
PSP X2

Create new raster layer 600x600
Flood fill white

Open your frame
copy and paste as new layer

Open up tube of choice
Copy and paste as new layer
move below your frame
I have her behind the left frame

grab your magic wand
Click inside the left frame ( you need to see marching ants)
Selections Modify expand by 10
Invert, highlight your tube layer and hit delete

Open up tube of choice
Copy and paste as new layer
move below your frame
I have her behind the right frame

grab your magic wand
Click inside the right frame ( you need to see marching ants)
Selections Modify expand by 10
Invert, highlight your tube layer and hit delete

Make both the tubes on the left and right
Luminance Legacy

Now open up a third tube
copy and paste as new layer
Move it above your frame layer

Highlight your white background layer
Now open up the paper of choice
I am using paper 1

Copy and paste as new layer
Go to layer, Load/save mask invert transparency unchecked
I am using Mask 81 by Weescotslass Designs

Now open another paper of choice.
I am using paper 4
Copy and paste as new layer
Make sure it is above your mask layer
highlight your frame layer and grab your magic wand
Click inside the left frame holding your shift down
click inside the right frame
Go to selections Modify and expand by 10
highlight paper 4
go to selections invert and delete

Open up element of choice
I am using the Flower
Copy and paste as new layer
Move t the very top
resize by 50%
Move below your final tube layer
Duplicate and mirror
Move down to the bottom of your frame
See mine for placement of both

Open up your beads
copy and paste as new layer
Move to the bottom of your frame
resize to your liking and move below your last tube layer

Add your copyright, name and save
You are done.

Don't forget to share your results.
Send to scrapsbysamantha@gmail.com

Eternal Love

2009-08-30T15:49:00.000-05:00

Scrap Kit Love Bites By Addictive pleasures
Twilight image of choice
Fonts of Choice
Word art of Choice

Create New Raster Layer 600x600 You can resize it later
Flood Fill White

Open frame 3 copy and paste as new layer
Resizing by 50%

Grab your magic wand and select inside the frame
Create new raster layer
Go to selections modify expand by 10%

Make sure your new layer is highlighted
Copy and paste image of choice into selection
Move below your frame layer

Open up your curtain bling
Copy and paste as new layer
Resize by 55%
Move above your frame

Open your blood element
Copy and paste as new layer
Resize by 110%
Moving below your image layer

Open up feathers 3
Copy and paste as new layer
Make sure it is above your blood splat layer

Open up chess1 copy and paste as new layer
Resizing by 30%
Move above to the top
Place bottom left of the frame

Open Chess2 copy and paste as new layer
Resizing by 40% Free Rotate Right by 90%
See mine for placement

Open Leaves copy and paste as new layer
Resizing by 60%
Move to the right below your image layer

Open Rose2 Copy and paste as new layer
Resizing by 50% move to the right of your frame
Move this above all other layers

Open Rose3 Copy and paste as new layer
Resizing by 50% move to the right near your white rose
Free Rotate to the Right by 10%
Move Below your white Rose

Open Rose 4 copy and paste as new layer
Resize by 50% move to the right near the right rose
Free Rotate left by 10%
Move below your white rose
See Mine for placement of the roses

Open your candle copy and paste as new layer
Resizing by 40% move above the rose
See mine for placement

Open up Bow3 copy and paste as new layer
Resizing by 30%
Move to the center of your candle

I have wrote Eternal Love
Used the Good Vibrations Font
Eye Candy 4000
Gradient Glow
Color Red ( Glow Width 3 pixels, Soft Corners 20%, Overall Opacity 60%)

Move that to the top of your frame
(see mine for placement )

Add your name, Copyright and save
you are done

Spring Fever

2009-08-30T12:52:00.001-05:00

A new tut Featuring the work of Elias Chatzoudis
and a fabulous kit by Bits N Bobs

This tut was written by Me on 22August2009
Any resemblance to any other tutorial is strictly coincidental.

Lets Begin

Supplies Needed
PSPx2 ( any version will work)
Scrap of Choice I am using Water-Melon by Bits N Bobs You can Purchase her scraps here
Tube of Choice I am using the artwork of Elias Chatzoudis. You can Purchase here. Do Not use if you do not have a proper License to do so.
Mask of choice.. I am using WSL_Mask226 by Weescotslass
Font of choice I am using Arctic

Open new layer 700x700 (rename Background)
We will resize this later
Flood Fill white

Open up Frame-11 from your kit
Copy and paste as new layer
Duplicate frame we will use it alittle later

Open your tube and copy as a new layer
Paste on your frame move under the duplicated frame
Grab your eraser tool and erase the top parts of the duplicated frame
We want her arms and head over the frame

Now open up your paper of choice
I am using paper-8
Copy and paste as new layer
Move it right above your background layer

Highlight your bottom frame and grab your magic wand
Click inside the frame, when you see your marching ants
Go to Selections modify and expand by 8

Hightlight your paper layer
Go to Selection and invert and hit the delete key

open some leaves I am using ivy 3
Copy and paste as new layer
Move above your background layer
See mine for placement

Open up flowers-10
copy and paste as new layer
Move above all other layer and place to the right of your frame
See mine for placement

Open up paper-3
with your background layer highlighted
Copy and paste paper as a new later
Open up your mask
SOuce Lumiance check and invert transperacy uncheck
Apply Mask and merge group

add drop shadow of choice to mask layer

Go to image
Resize ( make sure resize all layers is checked)
Resize by 80%

i have decided to drop the white background.
you can leave it if you wish

Add copyright information
Name and Save..

Don't forget to send me your results I would love to see them:)

GoodBye Bella

2009-08-30T12:50:00.001-05:00

I love the Goodbye Bella Scrap By Vicki @ PinkPrincessScraps
So I had to write a tut using it.

I would like to see your results
This is written by me on 21 August 2009

Supplies Needed

Tube or image of choice I am using one I found from Google
Scrap of choice, I am using GoodBye Bella by Vicki you can purchase it @ PinkPrincessScraps
Mask of choice ( i am using WSL_170 by Weescotslass

Create new image 700x700 ( we will resize it later)
Flood Fill White
Open your kit. Grab the goodbyebella_ele38_pp frame
Copy and paste onto your image place in the center
resize by 60% free rotate left by 20%
grab your magic wand and select inside your frame

Open your tube or image of choice
and paste into selection
I created a new raster layer, highlighted the new layer,
paste into selection

Open up a paper of choice. I am using goodbyebella_pp16
Copy and paste as a new layer.
Move below your other layers
Merge Group
Resize mask layer by 90%

Add your word art ( see mine for placing)

Now open up goodbyebella_ele13
Copy and paste as new layer
Move right above the mask layer
Open up goodbye bella_ele28
copy and paste as new layer
Move right above the mask layer
Below the feather. Move up a little

Open goodbyebella_ele48
copy and post as new layer
resize by 90
move below your image

open up goodbyebella_ele2
copy and paste as new layer
Move above your frame
resize by 30 %
See mine for placement.

Open goodbyebella _ele11
copy and paste as new layer
resize by 70
see mine for placement
duplicate and flip

Add your text and gradient glow of choice

add your copyright info
Add your name
Save and you are done

Remember send me your results I would love to see them..

Sweets

2009-08-30T12:36:00.000-05:00

Another New Tut, Using a brand new kit Sweet Treats by Sarah @ Pimp My Tags with Scraps
Art work by Elias Chatzoudis you can purchase his tubes at Here
Do not use with out a proper license.
PSPX2 ( any version will work)
Mask 236 by Weescotslass Creations You can get it Here Leave alittle love when you snag
Font of Choice I am using AlexBrush

y Tags W/Scraps

Lets Begin

Open a new raster layer 650x650
Flood Fill white and rename Background
We will resize it later
Open your tube and minimize it we will come back to that

Open your frame. I am using circle frame
copy and paste as new layer
Resize it by 75%

Now go to your tube. I am using 2
The first one is Annet By Elias Chatzoudis
copy and paste
move below your frame
Highlight your frame layer and grab your magic wand
with your magic wand click inside the circle
Go to Selections modify and expand by 7
Highlight your tube layer
Then go to Modify, invert and delete
You will need to change your setting to Luminance
and take your transparency to 33 %
Duplicate and mirror

Now open up a paper of choice
I am using pp6
Copy and paste as new layer
Move it below your tube layer
Highlight your frame layer and grab your magic wand
with your magic wand click inside the circle
Go to Selections modify and expand by 7
Highlight your tube layer
Then go to Modify, invert and delete

Grab your second tube
I am using Ilikeit
copy and paste as new layer
Place her in the center

Open another paper of choice
I am using pp8
Move above your background
Go to layers and load mask I am using WSL_mask236 by
Load your mask and Merge group

Open up a confetti or the sprinkles of choice
I am using pink sprinkles.
Copy and paste as a new layer
move above your mask group and resize by 90%

Open up your ice cream cone
Copy and paste as new layer
Move it to the top
resize it by 50%
Now move below your tube and move to the right.
See mine for placement

Open your sticker sweet
copy and paste as new layer
resize my 90%
Free rotate 45% to the right
Move to the top right ( see mine for placement )

Open up a candy pieces
copy and paste as new layer
resize by 80%
move to the bottom left under your tube
Duplicate and mirror

Now open the second candy piece
Copy and paste as new layer
resize by 50%
Move below your tube
Below your first candy piece
Duplicate and Mirror

Add your copyright, name
Resize all layers by 80%
and save

Send your results to me @ scrapsbysamantha@gmail.com
I would love to see them :)

Divalicious

2009-08-30T12:33:00.000-05:00

New Divalicious Tutorial

Supplies Needed
Divalicious PTU Kit by Bits N Bobs. You can grab this wonderful kit here
Tube of Choice I am using the art work of Elias Chatzoudis.
Do not use unless you have a proper license which you can get here
Mask of choice, I am using Mask 221 by Weescotslass Creations
Fonts of Choice
PSPX2 any version will work

Creaste New Raster Layer 600x600
flood Fill White

Open your frame I am using Frame4
Copy and paste as new layer
Resize by 50%

Open your Tube of Choice
Copy and paste as new layer
Move below your frame right side

Grab your magic wand
select inside the 2 frames in the right
go to selections, modify and expand by 6
Hightlight your tube layer
Selections, Invert and hit the delete key

Take your layer settings to Luminace
Transpercy down to 50%
Duplicate tube layer and mirror image

Go back to your tube layer and
copy and paste as a new layer
Resize by 90& and move above the frame layer
and place in the center

Open up your paper of choice
I am using paper 1
Go to layer, load/save mask, load mask from disk
I am using Mask221
Merge group

Open up your String Beads
I am using String 2
Copy and paste as new layer
move to the right
resize by 40%
Move to the right
See mine for placement

Open up ribbon 2
copy and paste as new layer
Move above your tube layer
Resize the ribbon by 50%
move to the bottom ( see mine for placement)
Highlight your tube layer
grab your eraser tool
with these settings
Size 16 harness 100 step 1 density 100 thickness
100 rotation 0 Opacity 100
Erase the little bit of the tube that is below the ribbon
Be careful not to erase to much.

Open up your flower of choice
I am using Flower 4
Copy and paste as new layer
Resize by 40%
Move to the top left
Resize again by 90%

Open up corset 2
copy and paste as new layer
Resize by 60%
Free Rotate to the right 25 degrees
move to the right
See mine for placement

open up fancy feather 3
copy and paste as new layer
Mirror and move the the right
under your tube

Open up shoe 6
copy and paste as new later
resize by 40 %
move to the bottom left
duplicate and mirror
Move duplicated layer to the left
Add your gradient glow to the shoes
and drop shadow of choice

Add your copy right
Name and save

Don't forget to send your results to scrapsbysamantha@gmail.com

Girly Girl

2009-08-30T12:26:00.000-05:00

New Tut using a great FTU Kit by Tamie @ Pink Pleasure Scraps
Mask 9 and 97 by Weescotslass Creations

Create New Raster Layer 600x600
Flood fill white

Open up GG_ele54_PinkPleasures
Copy and paste as new layer and resize by 70%

Open up GG_ele69_PinkPleasures
Copy and paste as new layer

Now grab a paper of choice
I am using GG_pp14_PinkPleasures
Copy and paste as new layer
Move below your frame layer

Go to layers, Load/Save Mask
Load Mask from Disk. You can use any mask
I am using Mask 9
Merge Group and resize by 90

Open up a second paper
I am using GG_pp16_pink pleasures
Copy and paste new layer
Move below your Mask group

Go to layers, Load/Save Mask
Load Mask from Disk. You can use any mask
I am using Mask 97
Merge Group and resize by 115%

Open up a couple of your girly elements
Makeup, Night Cream and more
Copy and paste them as new layers and
Resize to your liking

Open your girly word art
Copy and paste as new layer
Resize by 43%
Rotate right by 22%
Move to the right see mine for placement
Add a Glow with this color #7ec774

Now add your name and copyright and you are done.
Don’t forget to save and save often .
Send your results to scrapsbysamantha@gmail.com

Twilight Obsession

2009-08-29T11:34:00.000-05:00

My first attempt at a tutorial So bare with me..
I am still learning that.. Maybe I will get better at it
some day.. I would love to see your results. Please
feel free to share them with me..

Written 22 May 2009 By Samantha

Corel Paintshop Pro X2 or any other versions
Template 73 by Sixxbug
Twilight Scrap kit by Missy @ scraps with Attitude.
You can purchase it here
Mask of choice i used WSL_171
Image of Choice..

Open your template hit Shift D to copy.
Close the origional

Open a paper of choice..
I used twilight paper 17

Select your left black rectangle
Invert selection.
highlight your paper and hit delete

Do the same for the right retangle.

Add your image or tube of choice.

Elements and words of choice

Add your mask, I used twilight paper 16
Merge Group

Add your copyright and dont forget to save.

Beautiful and Broken

2009-08-29T11:25:00.001-05:00

New tutorial using a New Kit
Scrap Kit Broken by Michelle @ Michelles Angels
Tube By Zindy S.D. Nielsen
No Out Side Masks used!
Word Art By Me download here

Open New Raster Layer 550x550
Flood Fill White

Open up Frame of Choice
I am using MA_Broken_Elements 23
Copy and Paste as new layer
Resize by 75%

Open your Tube I am using Blue By Zindy
Copy and Paste as new layer
Move Below your frame layer
Move down to where the face is fully framed

Grab your Magic wand and click inside the frame
Go to Selections, Modify and Feather by 5
Go to Selections, Modify and Expand by 5
Highlight your tube layer
Go to selections, Invert and Delete

Open up MA_Broken_Elements17
Copy and Paste as new layer
Duplicate and Mirror and Then Flip
Move both below your Tube layer

Now open MA_Broken_ Element 2
Copy and paste as new layer
Move above all other layers
Resize by 50 %
Move to the left ( See Mine for placement _
Move under the tube layer
Duplicate and Mirror

Open MA_Broken_Element 44
Copy and paste as new layer
Resize by 25 %
Move to the bottom left corner of the frame
Free Rotate left by 30 %

Open MA_Broken_Element 40
Resize by 80%
Move below your frame and tube layer

Add your word art of choice.
I have included 3 that I made for this.

Add your name, Copyright information
Save and your done

Camo Princess

2009-08-27T14:22:00.000-05:00

This is just something I came up with last night.

I was playing around and I came up with this..

I used the Art work of Ismael Rac

and a beautiful new PTUscrap kit by Jess

I used a Mask by Weescotslass Creations